911 Targa (996) F6-3.6L (2004)
Important: The stabilizer mating bearing (mounting saddle No.4) need not be adjusted for street use.
1 Lock nut
2 Height adjusting nut
3 Lock nut
4 Stabilizer mounting saddle
Special tool 9647
Assembly
-
Push additional spring No. 8 onto the piston rod.
-
Slide the disc No. 7 and stop plate No. 6 (stop plate No. 6 in correct position) as far as they will go onto the piston rod.
-
Place coil spring in the correct position - tighter winding facing down - on the vibration damper.