911 Targa (996) F6-3.6L (2004)
2. Press mounting saddle with ball bearing onto flanged shaft.
3. Insert snap ring.
4. Install flanged shaft, check the transmission oil in the final drive and top up if necessary.
Removing Sealing Ring For Short Flanged Shaft
Removing sealing ring for short flanged shaft
Note!
^
The short flanged shaft can be removed only by partially undoing the wheel suspension.
1. Remove right rear wheel.
2. Uncouple drive shaft on the transmission side.
Caution: Protect drive shaft and shaft flange from damage.
3. Remove spacer ring
4. Undo right stabilizer mount.
Note!
^
Counter with an open-ended wrench when removing from the stabilizer fastening.