911 Targa (996) F6-3.6L (2004)
4. Ensure that the tab washer is perfectly secure.
Note!
^
Cardan flanges without tab washers have also been installed. In this version, the collar nut is secured against turning using fluid screw locking
lacquer.
^
During repair work, it is essential to degrease the thread with cleaning agent (e.g. Loctite quick cleaner), wet the thread with "Loctite 243" and
tighten the collar nut to 100 Nm (74 ft. lbs.).
5. Install cardan shaft.
Removing the Sealing Ring For the Flanged Shaft (Front Wheel Drive)
Removing the sealing ring for the flanged shaft (front wheel drive)
1. Remove front drive shaft.
2. Press out flanged shaft with two mounting levers.
3. Lever out sealing ring using a suitable tool.
Note!
^
Do not damage the sealing ring seat!
Installing the Sealing Ring For the Flanged Shaft (Front Wheel Drive)
Installing the sealing ring for the flanged shaft (front wheel drive)
1. Fill the space between the dust and sealing lips -arrow- on the new sealing ring with grease (e.g. Liqui - Moly).