porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Checking and Topping Up ATF (As of Model Year 2002)|Page 2394 > < Checking and Topping Up ATF (As of Model Year 2002)|Page 2392

911 Targa (996) F6-3.6L (2004)

Page 2
background image

NOTE:  Without ATF, the engine must not be started and the vehicle must not be towed.

3. Replace sealing ring for drain plug and tighten screw.

Tightening torque: 20 Nm (15 ftlb.)

4. Unscrew control screw -B-.

NOTE:  To undo and tighten the cap nut for the charging valve, counter with an open-ended wrench.

5. Screw off cap nut for the charging valve.
6. Screw connection hose 9507/1 -A- onto charging valve. Top up with ATF via the charging valve until surplus ATF runs out at the control screw

bore.

Checking and Topping Up ATF (As of Model Year 2002)|Page 2394 > < Checking and Topping Up ATF (As of Model Year 2002)|Page 2392