911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-518002.png)
9. Lever the end piece of the selector lever cable off the transmission lever with a commercially available removal tool. The selector lever cable can
be pulled down somewhat with the transmission lever to allow better access to the separation point.
Note!
^
When separating the selector lever cable and the transmission lever, make sure not to bend the transmission lever or kink the selector lever
cable too much.
10. Bend up the tabs -A- in the vehicle interior at the body opening and press the rubber sleeve outward through the body opening.
11. Pull B+ cable out of the slotted sleeve and pull the selector lever cable out through the body opening.
