911 Targa (996) F6-3.6L (2004)
Clutch Pedal Assembly: Service and Repair
Removing and installing the clutch pedal
Removing and installing the clutch pedal
Note!
^
Important notes
^
The description below applies to left-hand drive vehicles.
^
On right-hand drive vehicles, the clutch pedal lever is located directly next to the brake pedal (separated by the steering outer tube in the case of
left-hand drive vehicles). Assembly/disassembly for right-hand drive vehicles is similar to the procedure for left-hand drive vehicles.
^
Before the start of disassembly work on the pedals, the clutch boost spring must be fixed with a cotter pin (arrow at No. 5).
^
Important: secure the cotter pin (bend it over).