911 Targa (996) F6-3.6L (2004)
4.
If the problem occurs again after you have carried out the remedial action described in Step 2 and Step 3, the following procedure applies:
4.1
Visually check the clutch pipeline close to the plug connections for leaks. If you find a leak, replace the affected threaded joint. The
procedure for replacing threaded joints is described in --> Workshop Manual (986) '302331 Converting clutch line on master cylinder' (-->
Step 8).
4.2
Visually check the clutch master cylinder for leaks. If you find a leak, replace the master cylinder, --> Workshop Manual '300519 Removing
and installing the clutch pedal'.
4.3
Replace the clutch slave cylinder.
4.4
Bleed the hydraulic system according to the revised instructions in the Workshop Manual, --> see Prelimirary information Workshop
Manual '30007 Bleeding the clutch system'.
End of remedial action.
Parts Information
References
Enclosure: --> Workshop Manual '30007 Bleeding the clutch system'
Disclaimer