911 Targa (996) F6-3.6L (2004)
Removing Sealing Ring For Short Flanged Shaft
Removing sealing ring for short flanged shaft
Note!
^
The short flanged shaft can be removed only by partially undoing the wheel suspension.
1. Remove right rear wheel.
2. Uncouple drive shaft on the transmission side.
Caution: Protect drive shaft and shaft flange from damage.
3. Remove spacer ring
4. Undo right stabilizer mount.
Note!
^
Counter with an open-ended wrench when removing from the stabilizer fastening.
5. Undo the outer ends of both upper arms and remove the screws.