911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-588012.png)
2. Remove snap ring for ball bearing.
3. Press flanged shaft out of mounting saddle.
4. Lever sealing ring out of mounting saddle with large screwdriver.
Installation
1. Push new sealing ring up to the stop with special tool 9615.
2. Press mounting saddle with ball bearing onto flanged shaft.
3. Insert snap ring.
4. Install flanged shaft, check the transmission oil in the final drive and top up if necessary (see Page 39 - A1).
