911 Targa 4S (997) F6-3.8L (2007)
1. Insert cover -1- at the front -arrow E-.
2. Swivel cover -1- inward and push it in -arrow F- until the retaining clips -2- click into place.
Removing and Installing Trim Strip For the Instrument Panel
Removing And Installing Trim Strip For The Instrument Panel
Removing trim strip for the instrument panel
Removing trim strip for dashboard (on driver's side)
1. Insert a plastic wedge between the dashboard and left trim strip -1- and unclip trim strip.
2. Check clamp -2- and replace if necessary.
3. Insert a plastic wedge between the dashboard and right trim strip -1- and unclip trim strip.