911 Targa 4S (997) F6-3.8L (2007)
4. Check clamp -2- and replace if necessary.
Removing trim strip for dashboard (cup holder)
1. Open the glove compartment.
2. Insert a screwdriver between the cup holder -2- and left/right trim strip -1- and unclip cover carefully in -direction of arrow-.
3. Insert a screwdriver between the cup holder -2- and centre trim strip -1- and unclip cover carefully in -direction of arrow-.
Installing trim strip for the instrument panel
Installing trim strip for dashboard (cup holder)
1. Position centre trim strip -1- on the cup holder and press in until it clicks into place.