porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Fabric Lining|Page 4573 > < Removing and Installing Fabric Lining|Page 4571

911 Targa 4S (997) F6-3.8L (2007)

Page 6
background image

5. Pull the fabric lining -1- forward -arrow A- until the plastic cover -2 - is covered. Lift the plastic cover up slightly and fit the bead -arrow B-.

Subsequent work

1. Carry out subsequent work on rear right fabric lining.

1.1. Install front right fabric lining.Refer to Removing and installing fabric lining.

2. Carry out subsequent work on rear left fabric lining.

2.1. Install roof assembly. Refer to Removing and installing roof assembly.
2.2. Install front left fabric lining. Refer to Removing and installing fabric lining.

3. Carry out subsequent work on front fabric lining.

3.1. Install trim panel for sliding/lifting roof. Refer to Removing and installing trim panel for sliding/lifting roof.

Removing and Installing Fabric Lining|Page 4573 > < Removing and Installing Fabric Lining|Page 4571