911 Targa 4S (997) F6-3.8L (2007)
Installing front trim
Installing front trim panel
1. Install front trim panel.
1.1. Position front trim panel -3- (-Arrow-).
1.2. Connect connector for interior light -4- (-Arrow-) until the connector engages securely.
1.3. Secure front trim panel -3- with the fastening screws -2-. Tightening torque: 2.3 Nm (2.0 ftlb.)
1.4. Clip covers -1- into the front trim panel -3-.
Subsequent work
Install operator control unit for garage door opener. Refer to Removing and installing operator control unit for garage door opener.