911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-811010.png)
Installing A-pillar trim panel
Installing mounting for fixing clip
1. Insert mounting for fixing clip into the slot on the roof frame and slide it forward fully in -direction of arrow-.
Installing A-pillar trim panel
1. Insert A-pillar trim panel -1- into the retaining clips and into the front cut-out on the dashboard.
2. Position A-pillar trim panel -1- along the roof frame and windscreen frame from below and clip it in.
Subsequent work
1. Install B-pillar trim panel. Refer to Removing and installing B-pillar trim panel.
Removing and Installing B-Pillar Trim Panel
Removing And Installing B-Pillar Trim Panel
Technical values
