911 Targa 4S (997) F6-3.8L (2007)
4. Fold the air cushion for the seat -1- aside -Arrow A- and unscrew the two fastening screws -2- on the air cushion support plate -3-.
5. Take air cushion support plate -3- off -Arrow B-.
6. Push the pins -2- of the two expanding clips -1- back (-Arrow A-) and remove the expanding clips -1- -Arrows B-.
7. Remove air cushion for seat (-3-).
Installing air cushion for seat
1. Position air cushion for seat -3- on the air cushion support plate -Arrow A-.
INFORMATION: The air cushion for the seat is fastened only with the rear air cushion on the air cushion support plate.