911 Targa 4S (997) F6-3.8L (2007)
2. Secure the air cushion for the seat -3-. Use the two expanding clips -1- to fasten -Arrows B- it. To do this, the pins -2- must be forced into the
expanding clips -1- by pressing -Arrow C-.
3. The air cushion support plate -3- must be fitted into the seat frame -4- by inserting -Arrow A- the guides into the seat frame.
4. Fasten the air cushion support plate -3- with the two fastening screws -2-.
5. The air cushion for the seat -1- must be folded over -Arrow B- and aligned with the air cushion support plate -3-.
6. Push the white hose -1- onto the air cushion control valve.
7. Position support -2- with connected motor and air cushion control valve and screw down with the two fastening screws -1-.
Subsequent work
1. Install padding for front seat. Refer to Removing and installing padding for front seat.