911 Targa 4S (997) F6-3.8L (2007)
1. Carefully insert the line into the engine-compartment disconnection point and fasten with the fastening screw -3-.
-
Tightening torque: 14 Nm (10.5 ftlb.)
2. Push the line on and fasten it with the fastening screw -2-.
-
Tightening torque: 21 Nm (16 ftlb.)
Subsequent work
Subsequent work on compressor-condenser line
Screw compressor to engine block.
Install drive belt.
Fill in refrigerant.
Removing and Installing Condenser-Fluid Tank Line
Removing And Installing Condenser-fluid Tank Line
Technical values
Preliminary work
Preliminary work for line condenser-fluid tank
Removing left front wheel.
Remove front left wheel housing liner.
Draining refrigerant.
Removing the condenser-fluid tank line