porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3074 > < Procedures|Page 3072
Page 20
background image

14.3. Push in lower electric plug connection at heater/air-conditioning unit until it is felt to engage.

15. Push on connector for tilt sensor control unit -77- until it engages securely.

16. Fasten ground point under the unit carrier -76-.

16.1. Connect ground straps and tighten with the fastening nut.

17. Push on connector for pedal sensor -69- until it engages securely.
18. Push on connector for brake light switch -68- until it engages securely.
19. Push on connectors of KESSY/PAS control unit -66 and 67- until they engage securely.
20. Push on connector on Gateway control unit -65- until it engages securely.
21. Push together plug connection between main wire harness and wire harness for door at the left and right -59 and 60- until they engage securely.

22. Clip in wire harness at door sill.

23. Fasten ground point under the passenger seat -54-.

23.1. Connect ground straps and tighten with the fastening nut.
-

Tightening torque: 9 Nm (6.5 ftlb.)

24. Push on connectors for telephone control unit -50 to 53- until they engage securely.

Procedures|Page 3074 > < Procedures|Page 3072