porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3075 > < Procedures|Page 3073
Page 21
background image

24.1. Clip in wire harness for telephone control unit.

25. Clip in wire harness under driver's seat.

26. Fasten ground point under the driver's seat -49-.

26.1. Connect ground straps and tighten with the fastening nut.
-

Tightening torque: 9 Nm (6.5 ftlb.)

27. Push on connectors on control unit for rear convenience systems -46 to 48- until they engage securely.
28. Push on connectors on ParkAssist control unit -44 and 45- until they engage securely.
29. Push on connectors for centre airbag sensor at the left and right -42 and 43- until they engage securely.
30. Push on connector on Tiptronic control unit -41- until it engages securely and lock it.

30.1. Clip in wire harness for Tiptronic control unit.

31. Fit rubber sleeves -39 and 40- and push on connector for front seat-belt pretensioners at the left and right -37 and 38-.

Procedures|Page 3075 > < Procedures|Page 3073