911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-367001.png)
Fluid Line/Hose: Service and Repair
Removing and installing lines for ATF cooler
Information
Overview of ATF lines
1 - ATF lines
The ATF lines can be removed and installed without having to remove the Porsche Doppelkupplung (PDK). When removing and installing ATF lines,
make sure that the ATF lines are not strained. To avoid this, always loosen screws on both sides.
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove underbody panelling.
Removing lines for ATF cooler
Warning:
Hot fluid
^
Danger of scalding
