porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Fluid Pan, A/T|Specifications|Page 2067 > < Fluid Line/Hose, A/T|Service and Repair|Page 2063

911 Targa 4S (997) F6-3.8L (2007)

Page 1
background image

Fluid Pan: Specifications

ATF Pan Screws ............................................................................................................................................................................................  2.4 Nm (2 ftlb.)

Always use a new ATF pan and new aluminum screws.

The aluminum screws on the Porsche Doppelkupplung must be tightened according to a yield strength-controlled tightening procedure using an
electronic torque wrench 9768.

Tighten M6 screws at "medium" setting. 

Fluid Pan, A/T|Specifications|Page 2067 > < Fluid Line/Hose, A/T|Service and Repair|Page 2063