911 Targa 4S (997) F6-3.8L (2007)
Removing sealing ring for front halfshaft flange
1. Lever off halfshaft flange.
Halfshaft flange
Lever out halfshaft flange with mounting lever.
2. Carefully lever out sealing ring -1- with a mounting lever -3-.
Levering out sealing ring
Installing sealing ring for front halfshaft flange
1. Grease the sealing ring.
Greasing sealing ring
Fill the space between the dust and sealing lips -arrow- on the new sealing ring with grease, e.g. Liqui-Moly.
2. Use a pressure piece P 9537 to drive the sealing ring into the cover for final drive -1- until it is flush.