911 Targa 4S (997) F6-3.8L (2007)
Quarter Window Glass Weatherstrip: Service and Repair
Removing and Installing Side Window Seal
Removing And Installing Side Window Seal
Technical values
Preliminary work
1. Remove side window. Refer to Removing and installing side window.
2. Pull off rubber seal for door in the B-pillar area. Refer to Removing and installing rubber seal for door.
Removing side trim panel support
1. Remove side trim panel support.
1.1. Screw off fastening nuts -1- on side trim panel support -2-.
1.2. Unclip side trim panel support -2- at the retaining clips -Arrow A- and lift it up to remove it -Arrow B-.
INFORMATION: Left side only.
1.3. Turn plug connection for roof assembly -3- (-Arrow C-) and remove it from the side trim panel support -2- (-Arrow D-).
Removing inner side-window seal
1. Pull side-window seal off the seam of the side-window aperture.
Loosening sound absorber
1. Unscrew fixing clip -1- (-Arrow A-) and remove sound absorber -2- (-Arrow B-).