911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
-
Remove the carpet and floor plate from the driver's side foot well area and drill a 20 mm hole just above the clutch pedal and approximately 20 mm
to the right of the luggage compartment cable. Paint any bare metal to prevent corrosion (Figure 2).
-
Route the CD changer cable from the CD changer, through the hole, along the main wiring harness to the radio. Install the cable grommet into the
hole and ensure a correct fit.
-
Reinstall the carpet and floor plate for the driver's foot well area.
-
Remove the radio and connect the changer cable to the radio. Reinstall the radio.
-
Reinstall the luggage compartment carpet.
-
Route the CD changer cable between the body and left frame member to the inside. Determine the location for the cable clamps and make the
necessary cuts in the carpet.
-
Connect the CD changer cable to the CD changer. Slide the cable clamps through the carpet slots and mount the CD changer onto the frame member
using four M6 bolts.
-
Reconnect the battery and reset the time clock and radio code.
-
Completely reinstall the luggage compartment carpet and install the CD changer cover.
-
Test the system.
Labor Time:
350 TU
Parts Information: