911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Technical Service Bulletin # 2635
Date: 980910
Exhaust - Installation of Dual Tailpipe
911 Turbo
1/98
2635
9-10-98
Installation of Dual Tailpipe
Vehicle Type:
911 Turbo (993)
Model Year:
Model Years 1996 97
Concern:
Installation of chrome plated dual tailpipe made of stainless steel.
Information:
The standard tailpipes can now be replaced with chrome plated dual tailpipes made with stainless steel. (New vehicle Exclusive option number XLB).
Installation of the tailpipes does not have a negative effect on engine performance, emissions, or noise of the vehicle.
The Porsche Trademark and the EP 8110 identification must be visible from below when the parts are installed.
Required Tools
- Ratchet with extension
- 7 mm drill bit
- 6 mm allen wrench
- Phillips head screw driver
- 10 mm & 13 mm socket
- Plastic mallet
- 10 mm & 13 mm open end wrench
- Hand held electric drill
- Sheet metal shears
- Hack saw
- File
- Steel rule
- Hammer
- Vise
- Pliers
- Center punch
- Round file
Installation Information