911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Key to View
NOTE: Screws no. 3, 12 and 18 are microencapsulated. Replace screws, fit thread with Loctite (medium tight), if required.
Turbo Oil Pump Gears
INSTALLATION
1. Do not mix up gearwheels when cleaning or sealing oil pump.
2. Rework bracket, if required. Inadequate machining of the A/C compressor bracket may make it impossible to remove or install the V-belt of the
fan wheel in the right-hand area of the A/C compressor bracket. For this reason, the bracket should be checked and reworked while removed.
3. Remove V-belts of alternator and fan wheel.
