911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
5. Undo right and left-hand tie rods from steering box (arrow) and remove tie rods.
NOTE:
-
Make sure the steering rack is not damaged (score marks)
-
This is also important when removing and installing the steering gear.
-
Use protective caps or a rubber or plastic hose for protection.
6. Disconnect feed and return pipes from steering gear.
-
Block pipes or drain fluid into container.
-
Cover pipes if required to avoid dirt ingress.
7. Unclip power steering pipes from bracket in right-hand steering gear mount area.
-
Undo steering gear mounting bolts (arrows).