911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Drive/Propeller Shaft: Service and Repair
Removal
1. Remove centre console.
2. Remove underside panels.
3. Remove fit bolt for gearshift rod coupling.
4. Lift guide tube off ball joint.
5. Remove shift lever with gearshift rod and guide tube.
6. Remove front axle final drive, refer to Differential/Service and Repair. See: Differential Assembly/Service and Repair
7. Completely unscrew the two mounting screws of the clamping sleeve and push it forwards on the central tube.
Shop Made Steel Supports (Part 1 Of 2)
Shop Made Steel Supports (Part 2 Of 2)
8. Apply flat steel parts (made in workshop) to support central tube.
