911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5.2 Insert console --> Figure 14 -A- in center console.
The bars --> Figure 14 -C- on the console must engage in the retaining clips.
5.3 Secure the console with the three new tapping screws (steel, 4.2 x 25) --> Figure 15 -A-.
5.4 Place rubber insert --> Figure 16 -A- in center console storage bin.
6. Install control unit.
6.1 Loosen protective film --> Figure 17 -arrow- on the control unit.
ATTENTION
Using unsuitable tools
-
Risk of serious or irreparable damage to the control unit.
--> Use a small screwdriver or another suitable tool to actuate the Dual Inline Package switches (DIP switches).
--> Actuate DIP switches carefully, without slipping, using only slight force.
6.2 Configure the control unit.