911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1.1. Position fire extinguisher holder -3- (-arrow-).
1.2. Coat fastening screws -4- with Loctite 243 and tighten them. Tightening torque: 10 Nm (7.5 ftlb.)
1.3. Secure wire harness for control panel -1- with the tie-wrap -2- on the fire extinguisher holder -3-.
2. Assemble the tray.
2.1. Pull restraining strap -1- through the upper opening in the tray -2- (-arrow A-).
2.2. Slide tray holder -3- through into the restraining strap -1- (-arrow B-).
2.3. Slide restraining strap -1- through the lower opening in the tray -2- (-arrow C-).
3. Position tray -2- (-arrows-) and secure with the fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)
Installing fire extinguisher
1. Insert fire extinguisher -2- into the tray -3- (-arrow A-) and lock it with the restraining strap -1- (-arrow B-).