911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-709001.png)
Garage Door Opener Control Head: Service and Repair
Removing and Installing Control Unit For Garage Door Opener
Removing And Installing Control Unit For Garage Door Opener
Removing control unit for garage door opener
1. Carefully unclip control units -1- at the openings provided -arrows- with a small screwdriver and remove.
2. Pull off connector -1- for control units -2- -arrows- and remove control units -2-.
Installing control unit for garage door opener
1. Push on connector -1- for control units -2- -Arrows A-.
2. Insert control units -2- with electric connecting lines into the assembly openings of the cover -3- in an upwards direction -Arrows B-.
