911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-776002.png)
2. Remove rear underbody cover -1-.
Removing cover for underbody - front section
INFORMATION: Fastening nuts cannot be used again following removal.
1. Unscrew fastening screws -2- and fastening nuts -3-.
2. Pull cover for underbody -4- out of the two brake air ducts -5- at the rear and remove it.
3. Unscrew fastening screw -2- and remove brake air duct -5-.
