911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-776003.png)
Installing cover for rear underbody
Installing cover for rear underbody - front section
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Position brake air duct -5- on the transverse strut and secure with the fastening screw -2-. Tightening torque: 2 Nm (1.5 ftlb.)
2. Insert cover for underbody -4- and engage it at the two brake air ducts -5- at the rear.
