911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-776004.png)
3. Tighten fastening screws -2-. Tightening torque: 2 Nm (1.5 ftlb.)
INFORMATION: Fastening nuts cannot be used again following removal.
4. Tighten fastening nuts -3-. Tightening torque: 2.5 Nm (2.0 ftlb.)
Installing cover for rear underbody - rear section
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for rear underbody -1-.
2. Tighten fastening screws -2-. Tightening torque: 2 Nm (1.5 ftlb.)
Subsequent work
