911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Unscrew plastic nuts -2- and remove side section trim panel -3- -Arrow B-.
Installing front side section trim
Installing front side section trim panel (passenger's side)
1. Position side section trim panel -3- -Arrow A- and screw down with the plastic nuts -2-.
2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B- Double-sided adhesive tape or suitable adhesive.
Installing front side section trim panel (driver's side)
1. Insert side section trim panel -3- einsetzen -Arrow A- and screw down with the fastening screws -2-. Tightening torque: 2.0 ftlb.
2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.
Removing and Installing Instrument Panel
Removing And Installing Instrument Panel
Technical values