porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cover (Cold Air Bulkhead)|Page 4335 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4333
Page 19
background image

Preliminary work

1. Remove steering column switch. Refer to Removing and installing steering column switch.
2. Remove trim under instrument panel. Refer to Removing and installing trim under instrument panel.
3. Remove instrument cluster. Refer to Removing and installing instrument cluster.
4. Remove dashboard insert. Refer to Removing and installing dashboard insert.
5. Remove passenger's airbag unit. Refer to Removing and installing passenger's airbag unit.
6. Remove stopwatch. Refer to Removing and installing stopwatch.
7. Remove cover for instrument panel (defroster cover). Refer to Removing and installing cover for instrument panel (defroster cover).
8. Remove front loudspeakers. Refer to Removing and installing front loudspeakers.
9. Remove centre console cover. Refer to Removing and installing centre console cover.

10. Remove oddments tray. Refer to Removing and installing oddments tray.
11. Remove switch console. Refer to Removing and installing switch console.
12. Remove air-conditioning system regulator. Refer to Removing and installing air-conditioning system regulator.
13. Remove display and PCM operator control unit. Refer to Removing and installing display and PCM operator control unit.
14. Remove middle air vent. Refer to Removing and installing middle air vent.
15. Remove air vent at door. Refer to Removing and installing air vent at door.
16. Remove outer air ducts. Refer to Removing and installing air duct.

Removing instrument panel

Removing the device carrier

1. Undo fastening screws -1-.

Removing and Installing Cover (Cold Air Bulkhead)|Page 4335 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4333