911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Cut two felt strips each approx. 100 mm long.
3. Stick felt strips -1- to the outside of the clamping rail -2- at the left and right in the cut-out area.
4. Attach clamping rail -1- to the main folding top bow. Secure joint at the left and right with fastening screws -2-.
5. Drill through clamping rail and main folding top bow.
5.1. Drill through the clamping rail -1- and main folding top bow -2- at the left and right at dimension -X= 75 mm- using a 3.2 mm drill bit.