911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Loosen both fastening nuts -1-, release the electric plug connection -2- and unplug from control unit.
3. Pull motor with driving mechanism to the rear out of the console.
4. Loosen the two hexagon-head threaded bolts -3- and remove.
5. Remove motor for convertible-top compartment lid drive -4-.
Installing motor for convertible-top compartment lid drive
1. Grasp convertible-top compartment lid above the brake light and pull up and back until it is fully open.
The potentiometer must be set to 6.2 k ohms before installing the motor.
2. Slide potentiometer onto shaft of the motor and note position of lug -A- on motor; do not clip potentiometer to the motor.