911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing water channel
CAUTION: Danger of injury. Sharp-edge burrs on body and unit parts.
-
Danger of injury from sharp edges on body and unit parts.
-
Wear protective gloves when working in the area of sharp-edged body and unit parts.
1. Remove cable holder -1- (-arrow A-) and loosen sound absorber -2- to the side -arrow B-.
2. Press out clamp -1- and screw off fastening nut -2-.
3. Cut out water channel -1- with a knife -2-.