911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Remove residual adhesive -3- and clean sealing surface.
Installing water drip pan
Installing water channel
CAUTION: Danger of injury. Sharp-edge burrs on body and unit parts.
-
Danger of injury from sharp edges on body and unit parts.
-
Wear protective gloves when working in the area of sharp-edged body and unit parts.
INFORMATION: Sealing surface of water channel and inner wheel arch must be clean and free of grease.
1. Apply approx. 10 mm of adhesive -1- along the inner wheel arch.
2. Position water channel on the body and screw it on tight with the fastening nut -2-. Tightening torque: 7 Nm (5 ftlb.)