911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION: Only for removal of the rear left hardtop locking mechanism.
2. Unclip lining -1- at the sides from the hardtop body -2-.
INFORMATION: Only for removal of the rear left hardtop locking mechanism.
3. Drill out tubular rivet -1-, disconnect electric plug connection for rear window heating -2- and remove wiring harness -3- from hardtop body -4-.
4. Unclip trim panel -1- for the rear hardtop locking mechanism upwards.
5. Loosen fastening screw -1- for the rear hardtop locking mechanism -2- by approx. two turns and then loosen fully by hand (approx. eight turns).