911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION: Only for removal of the rear left hardtop locking mechanism.
4. Rivet flat plug -2- of wiring harness with a 3.2 mm tubular rivet -3- to the hardtop body -1- and connect the electric plug connection for the rear
window heating -4-.
INFORMATION:
-
Only for removal of the rear left hardtop locking mechanism.
-
Once a trim panel has been clipped in, the old plastic clips are no longer usable and must always be replaced.
5. Clip in lining -2- at the sides to the hardtop body -1-.
INFORMATION: Only for removal of the rear left hardtop locking mechanism.
6. Insert support for centring peg -2- and tighten with fastening screw -1-. Tightening torque: 10 Nm (7.5 ftlb.)