911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5.1. Carefully pull cover -1- out of the seat shell -2- starting at the back -arrows A-.
If the fastening clamps -3- are also pulled off, remove them from the cover immediately -arrow B-.
5.2. Press the removed fastening clamps -3- into the seat shell.
5.3. Disengage cover -1- at the fastening clamps -4- at the front -arrow C-.
Installing cover for front seat
Installing cover for side of seat
1. Check fastening clamps -1- and replace them if necessary.
2. Check fastening clamp -2- and replace if necessary.
3. Secure cover.
3.1. Fit and straighten cover -1- ( -arrows A- ).
3.2. Press cover into the seat shell -2- at the sides -arrow B-.
3.3. Press cover into the fastening clamp -3- at the front -arrow C-.
4. Fold cover -1- inwards -arrows-.