911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-865042.png)
INFORMATION: Make sure the Velcro fasteners join cleanly.
5. Press Velcro fasteners -3- onto the seat shell -2- ( -arrows A- ).
6. Straighten cover -1- close to the belt strap guide and press it onto the Velcro fastener -2- ( -arrows B- ).
7. Press joint on cover -1- into the seat shell -2- at the sides using a plastic wedge and secure by tapping gently (with a plastic hammer).
8. Remove adhesive tape -2- from the seat shell -1-.
Installing seat cushion (rear part)
