911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Position seat cushion -1- on the seat shell -3- ( -arrow- ) and straighten it. Press on Velcro fasteners -2-.
Installing seat cushion (front part)
1. Position seat cushion -1- on the seat shell -3- ( -arrow- ) and straighten it. Press on Velcro fasteners -2-.
Subsequent work
Removing creases in seat cover (leather)
CAUTION: Risk of damage to cover if excessive heat is applied.
-
Creases in cover
-
If creases have formed, only short partial warming with the hot-air gun is permissible.
-
The hot-air temperature must always be Temperature: 50°C.
1. If creases have formed, partially heat the affected areas of the cover with the hot-air gun and smooth out the cover using the special tool.
Scudding knife P 9747
Knurling tool P 9747/1
Bone burnisher P 9747/2
Hot-air gun v.a.g 1416
Subsequent work
INFORMATION: Only for cover for side of seat.
1. Install bottom belt strap guide at the left and right. Refer to Removing and installing belt strap guide (folding sports bucket seat).
2. Remove sports bucket seat from the assembly fixture and install it. Refer to Removing and installing folding sports bucket seat.