911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-866012.png)
2. Fold cover -3- over all the way around and remove padding -2- ( -Figure B- ).
Removing padding for side bolsters
INFORMATION: The side bolster padding will be irreparably damaged during removal and must be replaced.
1. Loosen inner padding -1- from the seat shell -2- in the bonding area -3- ( -arrows A- ).
2. Loosen padding -1- at the sides from the seat shell -2- ( -arrows B- ).
3. Remove remaining adhesive -1- and clean the contact surfaces of the seat shell -2- with cleaning agent.
