911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Installing padding for front seat
Installing padding for side bolsters
1. Apply adhesive -2- to the marked area of the padding -1-.
INFORMATION: The contact surface of the seat shell must be free from dirt and grease.
2. Place padding -1- on the seat shell -2- and straighten it -arrows A-.
3. Press on padding -1- in the bonding area -3- of the seat shell -2- ( -arrows B- ).
Installing seat cushion padding (rear part)
1. Insert padding -2- into the cover -3- and straighten it ( -Figure A- ).