911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-880004.png)
Installing insulation for rear wall
1. Pull off protective film and stick on insulation for rear wall -1- in the marked area.
2. Pull off protective film and stick on insulation for top of rear wall -2- in the marked area.
3. Heat up insulation for rear wall at the bottom -1- and top -2- using a Leister Elektron hot-air gun and press on securely using a rubber roller.
Installing sound absorber for firewall lid
INFORMATION: The fastening points must remain accessible when positioning the sound absorbers (insulation).
1. Pull off protective film and stick insulation for firewall lid -1- to the firewall lid -2-.
Replacing Sound Absorber (Insulation) For Wheel Housing
Replacing Sound Absorber (Insulation) For Wheel Housing
Tools
