911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Secure rear spoiler at the left and right hydraulic cylinders.
2.1. Socket-wrench insert P 9752 -4- must be inserted into the bores on the outer pipe -3- and on the mount -2-, and the mount -2- on both
hydraulic cylinders must then be screwed into the rear spoiler -1- completely and tightened. Tightening torque: 30 Nm (22 ftlb.)+5 Nm (+3.5
ftlb.)
2.2. Turn outer pipe -3- using the socket-wrench insert P 9752 -4- until the bore on the mount -2- is directly covered by the outer pipe -3-. The
bore on the outer pipe -3- must point towards the rear in the direction of travel.
3. Retract rear spoiler.