911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Preliminary work
1. Remove rear spoiler. Refer to Removing and installing rear spoiler.
2. Remove rear lid. Refer to Removing and installing rear lid.
3. Remove engine-compartment light. Refer to Removing and installing bulb for engine-compartment light.
Removing spoiler drive
NOTICE: Fastening screws securing pump unit to bracket become loose
-
Risk of irreparable damage to pump unit
-
Do not unscrew the fastening screws used to secure the pump unit to the bracket.
-
The bracket cannot be replaced. In the event of damage, replace the pump unit.
1. Unscrew fastening screws -1- and remove pump unit -2-.